uokka

Im really sorry to hear that you've lost your best friend. I whish you, when the pain goes away, a lotta love lasts. Im sure it will.

Looking great! Pretty nice font you made there. The speedo font is still blury, but i guess that comes from text sizing. Time circuits are perfect!

I believe the info piracy of the game industry just pushes us paranoid customers further into copy piracy.. which is no good.

Is your PC beeping like crazy when attempting to boot? If so, check BIOS Beep Error Codes. Its like morse code. Each BIOS (AMI, Pheonix, etc.) has its own code table. This might tell you the source of the problem (3x long beep = RAM Error; 2x long + 1 short = Something else..). Your brothers PSU might be incompatible with your MoBo. But if it is compatible, try to power up your brothers PC with your PSU. If it works, your MoBo is probably broken. The same happend to me with a particular PC in the past. Dont know if it was a loose connection or a nearly broken cable. However, try cleaning ALL connections by repeatedly plugging and unplugging them (carefully, of course).

If you had set some sensitive BIOS options, like clockings for CPU or RAM, you may try removing the CMOS Battery from your Motherboard and reset the BIOS by switching the respective jumper for 10 seconds. The jumper should be near the battery. Is your PC doing anything? Beeping? Rotating cooling fans? HDD noise?

yes, unplugging everithing not essentially needed to boot up would be a good idea too.

Hi, maybe your graphics card? You have components to theoretically set up two PCs, right? Are you trying to fix it with your old components? I assume your trying to get the more powerful variation running (if there is one), so you may check compatibility lists. See your mobo's Manual to check how much Watt the psu has to deliver in order to supply not only the mobo but ALL installed cards with enough power. Meaning minimum Watt needed and maximum Watt eh.. capable. However, as your screen and keyboard also stays dead, i believe mobo or power supply is broken. edit: Also check your Mobo's BIOS compatibility list for supported CPU and RAM.

The coil grid is invisible when viewing from the wrong angle. Like where its curved to be connected to the bottom back of the car. There you can see through the backside of the coils. Saving performance here? Question: Will you also add those fans inside the vents as the crysis DeLorean has, or has that been hatched out by Tirido (meaning: not movie accurate)? Anyways, something to see inside would be cool.

No, I was clicking the bar above the pic reading "Reduced: ..% of original - klick to vie full image" which opens a new window in my browser showing a bigger one as the prewiew image. Klickin on the picture indeed opens the pic in a new tab with the same resolution as on MODDB..

MODDB shows even bigger biggies.. I just saw the leather textures on the seats and the steering wheel in a higher resolution. The seams are looking great! I've never seen a GTA model in that level of quality (in terms of screenshot visibility). (but your emoticons suck;)

Very!

Looking good at night! Pretty atmospheric. I like the neon in the 2nd all night shots. The 3rd night shot with the lamp is just a great picture.. Good job.

No, I dont know 3dsMax. I meant, is the brightness setting in the Game Options Menu set to Maximum? Maybe setting it lower will give us a better view of the neon/lit sign effect. And Marty really looks depressed. () Could you make him look more neutral? ()

Good looking! The neon/lit sign effect in the night shots seem not to be very efectful.. Is your "Brightness" setting on max? Also, you left some bright texture around Mr.Fusion.

The Simpsons

Great, good job. Definitively better. maybe a little bit more darker and lower contrast?

Haha, sorry. I tought i would make sense to say hardly. Anyway, I wanted to push your potential assistants to post their knowledge. -- I dont wanna say you have to install more files. Im saying you should try recompiling only my paintjob changing sourcecode (.TXT file) of cold.s. Maybe, when compiled after CLEO 4 installation, it will be different to a version compiled vith CLEO 3 files (sascm.ini and opcodes.txt). Just a suggestion, but who knows..

Sanny Builder's sascm.ini and opcodes.txt (important for syntax, i think) are getting updated on CLEO 4 installation; Maybe recompile cold.txt to cold.s could help. EDIT: Im hardly awaiting a solution for the multiple texture issue, as it could fix paintjob problems for a lot of models..

Hmm, dont know why. I just installed the Original 20101105 source code to test this. For me, my cold.s works in there.. My next step will be making the hover scripts compatible. Must be your fault

Im not sure if the paintjob script needs CLEO 4. Let me know if it does. The movies arent too accurate to them selfes (fiberglass model) and the Tell Tale Delorean was made for another engine, so I think some corrections are allowed. We call this artistic freedom..

'struttin that ass'? Thats why I hate TV! stupid shows.. sorry. 'Form This Way' is art, even if those guys cant sing.

I made a quick texture edit to test this. I was even about to make a video, but it just wouldnt make any sense.. When I tryed to add two remap textures, the last remap texture from the paintjob .TXD (doors) was used for the hole paintjob. So it seems to be totally impossible. One texture allone is needed to add the Ice Effect.. watch the license plate: Wrong wheel sizes.. I didnt used the right vehicles.ide line. About cold.s: Trance, did you try to update to CLEO 4? PS: Darken the texture, trance!

If I deciphered knightprowl's text correctly , then I have to say he's right. Changing wheel sizes works best if you dont realy know which values you need to put in.. It's in vehicles.ide.

I would take the Time Train as well, because I could live in it like in a caravan..

Or enforcement of destiny?