PizzaPlanetTruck 0 Report post Posted October 5, 2009 Hey Guys! In the Bttf 0.1.3.2. readme reads this: Requirements : GTA SA v1.00 v1.01 or v.2.00. Does This means i don't need to downgrade or patch anything? Thanks Already! PPT Share this post Link to post Share on other sites
RG 1 Report post Posted October 5, 2009 That's what it says.. This was discussed somewhete already Share this post Link to post Share on other sites
Mike 214 Report post Posted October 5, 2009 You don't need to download the patch. Share this post Link to post Share on other sites
PizzaPlanetTruck 0 Report post Posted October 5, 2009 You don't need to download the patch. An if i want to download other car mods, do i have to downgrade it anyway? Share this post Link to post Share on other sites
Mike 214 Report post Posted October 5, 2009 In that case yes. If you are using only the bttf mod on SA V2, then you do not need to downgrade. Anything other than that, then apply the downgrader. Share this post Link to post Share on other sites
daangelo29 5 Report post Posted October 5, 2009 Uh, you don't need to, actually. You have the SA v1.0-format bttf.img which works like the gta3.img file, just use that to store your car mods. Just import the models there, then, if those models are meant to replace existing models in gta3.img, rename those models in the IMG. If the car models are to be installed by an installer that works like the BTTF SA mod installer, rename gta3.img to gta3.old and bttf.img to gta3.img, run the installer, rename the IMGs back, rename the models the car mods are suppose to replace in gta3.img, then rebuild the bttf.img file. If it is going to use SAMI or GTA Mod Installer, you should be able to find the models in a ZIP file or in a folder. Just import them manually (to bttf.img). Share this post Link to post Share on other sites