archer9234 20 Report post Posted July 20, 2013 Not sure if there was a thread on the Diamond Select DeLorean's. But I wanted to share some photos of mine I recently got. BTTF I (With Hook modifcation), BTTF 3 White Wall, and Rail Road are also avalible. Mr Fusion's top is removable. But I tested if it would fit bakc in the box with it on. It does. So It's safe to glue the top part onto the car. Pros: - It's large. 13 inches long. And to scale with a 4 inch figurine. - Lighting system is nice. Main time travel lights, front lights, dashboard, Time Circuits, Flux Capacitor, rear lights, and boosters all light up. Though bootsters are red instead of yellow. - Tires are real rubber. - Comes with all stock BTTF I SFX's and hover mode SFX's - Trunk lid, and both gull wing doors open. Cons: - No lights always on mode. - Mr Fusion doesn't open. - All the DMC name brands aren't on the car. Fans have made decals to add these on. - The rear deck is missing key details because the sound button is there. - No stand to use for Hover Mode. - Some details on the Dashboard like the 50's clock is missing. - Cabling on the outside is all black. - Turning signal lights are missing - The different hue front light area wasn't done. - SFX's have a pitch problem and sound slow. Share this post Link to post Share on other sites
BTTFModMachine 260 Report post Posted July 20, 2013 That's a long list of cons... Still, what kind of movie accuracy do you expect from a model car? It's nice looking until you get into all the movie details. Share this post Link to post Share on other sites
archer9234 20 Report post Posted July 20, 2013 It is a $50 toy. I'm fine with the lack of details. Except on the front lights and sound pitch problem. Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted July 23, 2013 Mine had a problem where the hover-conversion switch snapped off after a few weeks of being on display. I didn't get a replacement because it was already the second one I purchased since the first was missing components. So overall, I was never really pleased with the item, but it's a nice collector's piece. I'm going to wait for the Hotwheels 1:18 to come out. Share this post Link to post Share on other sites
Shadowknight1 0 Report post Posted March 10, 2014 Mine had a problem where the hover-conversion switch snapped off after a few weeks of being on display. I didn't get a replacement because it was already the second one I purchased since the first was missing components. So overall, I was never really pleased with the item, but it's a nice collector's piece. I'm going to wait for the Hotwheels 1:18 to come out. I had that happen to mine as well. It's decent, but has the same inaccuracies that the Sunstar model has. Only real pro that the plastic model has over die cast is the doors stay open. You'd think they'd find some way by now to have them stay open at the right angle. Share this post Link to post Share on other sites