RobertBlox 112 Report post Posted April 30, 2012 (edited) [uPDATE: See v3 (the remake) of these mods here: http://www.bttfhillvalley.co.uk/forum/inde...?showtopic=3859] Hello everyone, Over the past month, I have made a few major edits to the GTA Vice City Mod including the following: New Marty Player Skins New 1955 "Dance" Marty Mcfly skin Modified "Casual" Marty Mcfly T-Shirt Skin New Doc Player Skins New (BTTF Ride) Doc Skin New Particle Effects (movie-accurate and scratch made) [Featuring] Modified headlight textures and no glare from headlights [Featuring] Fire textures in particle.txd (you can see this on the fire trails after time travel) [Featuring] Wormhole in the particle.txd (thanks to Carlos Mcfly) [Featuring] Smoke Textures in the particle.txd New DeLorean DMC-12 lights and license plate textures New BTTF 1 lights and license plate textures New BTTF 2 lights and license plate textures New BTTF 3 lights and license plate textures New BTTF 3 RR lights and license plate textures New Time Circuit Off Sound New Custom Radio stations Modified Savegame File named "Back to the Future" (with near-infinite cash, movie weapons, and 2 of each BTTF car in each garage at Sunshine Autos) Hope you like my add-ons! - RobertBlox EDIT: The fonts you see in the game were made by Thyncho88 The Mr. Fusion HUD was made by Arcticlight. I also installed the 0.2e Fanmade Addons before adding my mods to the game myself. The post for version 1 of these add-ons can be found Here Handling.cfg edits can be found Here EDIT[2]: Marty Mcfly Skin Edit (new Vest and other improvements): EDIT[3]: Unfortunately, most of this mod data has been lost due to a hard drive crash and will be recreated. Edited August 17, 2012 by RobertBlox Share this post Link to post Share on other sites
timetrain 11 Report post Posted April 30, 2012 You delorean modifications do look a lot better, but I'm going to be honest it looks bad compared to the newly modeled delorean for 0.2f. And the main Marty looks better than Tommy with a marty skin but the shoulders are messed up and his vest looks more like an open shirt with short sleeves. But I'm sure thats because of the way the model's texture applies. Particle effect textures look good as far as I can tell. They are laggy in the video. The explosion looks nice. Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted April 30, 2012 (edited) You delorean modifications do look a lot better, but I'm going to be honest it looks bad compared to the newly modeled delorean for 0.2f. And the main Marty looks better than Tommy with a marty skin but the shoulders are messed up and his vest looks more like an open shirt with short sleeves. But I'm sure thats because of the way the model's texture applies. Particle effect textures look good as far as I can tell. They are laggy in the video. The explosion looks nice. Thanks you for your compliments and criticisims timetrain. Of course, the retexture of the 0.2e DeLorean is no where near as good as the new 0.2f car, but I just couldn't stand those pinkish rear lights and pixelated headlights (if you know what I mean). I am also aware that the skins are not perfect, but those are the limitations of VC. This is especially because VC has a tendency to stretch and shrink textures on clothing in wierd ways (as you stated). On the bright side, at least the skin of Marty with the vest is a lot better than most others that have been made using a Vice City character model as its base (no offense to anyone). The particles took the longest to make, and I'm glad you liked them! I constantly had to keep opening and closing VC to make sure I got them right before I could finally declare them as perfect. As you said, they are laggy in the video, but this is only because of Fraps. Without Fraps, they perform just fine! Once again, thank you for your comments! - RobertBlox Edited April 30, 2012 by RobertBlox Share this post Link to post Share on other sites
gtavicecity 6 Report post Posted April 30, 2012 Good job, I think it's better than what I was doing Congratulations!! RobertBlox!!!!! Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted April 30, 2012 (edited) Good job, I think it's better than what I was doing Congratulations!! RobertBlox!!!!! Thank you very much gtavicecity. Although, I am only good at texturing/retexturing models. Making models by hand is not something I am the best at. In order to get even close to making models as good as yours, it would take me weeks and weeks longer to do. Thanks once again, - RobertBlox EDIT: By the way, I've been eager to see how your edits have been going so far. Could you create a post with them at some point? Edited April 30, 2012 by RobertBlox Share this post Link to post Share on other sites
gtavicecity 6 Report post Posted April 30, 2012 Bueno. As soon as I finish some things I'll make a topic Share this post Link to post Share on other sites
hscitpe 6 Report post Posted April 30, 2012 Wow looking really cool man. Love to try out the new Marty skin! Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted April 30, 2012 (edited) Wow looking really cool man. Love to try out the new Marty skin! Thanks hscitpe! Unfortunately, I don't have any sort of file sharing account, otherwise I would put them up for download (that is, after asking for permission to put certain parts of these up from their respective owners, such as Thyncho88's fonts). Also, I plan to improve the Marty skin very soon! This time it won't look like a short-sleeved shirt (as timetrain mentioned). EDIT: I'm most likely not going to change the Marty skin because I can't find another good model in VC. That and when I tried using the Cuban Tommy Vercetti model, the arms on Marty looked way to skinny! Edited July 11, 2012 by RobertBlox Share this post Link to post Share on other sites
gtavicecity 6 Report post Posted April 30, 2012 (edited) Hello! I'm making a model of Marty Mcfly, with new textures. Here a picture: This was a surprise!! Edited April 30, 2012 by gtavicecity 1 Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted April 30, 2012 (edited) Hello! I'm making a model of Marty Mcfly, with new textures. Here a picture: This was a surprise!! Very nice! EDIT: I also have the 3DS Max model of Doc Brown, too. I can message you the link if you would like it. Edited April 30, 2012 by RobertBlox Share this post Link to post Share on other sites
gtavicecity 6 Report post Posted April 30, 2012 Very well, I hope it is a good model Send it to me when you want. Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted April 30, 2012 Very well, I hope it is a good model Send it to me when you want. Items sent. Good luck! Share this post Link to post Share on other sites
Carlos_McFly 7 Report post Posted April 30, 2012 Nice add-ons dude! And thanks for the credit Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted April 30, 2012 Nice add-ons dude! And thanks for the credit Thanks Mr. Mcfly! I couldn't have done it without your help! Share this post Link to post Share on other sites
Dave27 1 Report post Posted May 1, 2012 Hello! I'm making a model of Marty Mcfly, with new textures. Here a picture: http://media.moddb.com/images/members/1/73.../Maty_Mcfly.jpg This was a surprise!! No offense but isn't that the model from the telltail game? Share this post Link to post Share on other sites
timetrain 11 Report post Posted May 1, 2012 I think he means he's making a more realistic texture for that model. Share this post Link to post Share on other sites
gtavicecity 6 Report post Posted May 1, 2012 (edited) It is true, I am improving the model and textures and I think I'm doing a good job! I did not want to upload my model, so I decided to publish the normal model, which is similar to my model. I used the normal model to do my model. Ie this model was the basis for my model Sorry for my bad English but it helped me a lot of the Google translator.I hope you have understand the why? I think if I finish the model I will post it on my next topic Thank you Edited May 1, 2012 by gtavicecity Share this post Link to post Share on other sites
Goingnowherefast 1 Report post Posted May 7, 2012 [*]New Marty Player Skins [*]New 1955 "Dance" Marty Mcfly skin [*]Modified "Casual" Marty Mcfly T-Shirt Skin [*]New Doc Player Skins Firstly congrats on your work thus far! i like the light casings, the shiny number plate, the skins, the fact the delorean goes over 100mph! Secondly may i suggest opening Sanny and removing the wanted level? then using txd editior to edit the font (hud) the remove wanted stars! Also making the speedo smaller i have done the above and it works better! In addition to this i have a mission (WIP) where you deliver flyers for saving the clocktower with a flying delorean! Thirdly may i suggest a partnership in exchanging material or may i request using some of your add-ons or could you possibly give me some pointers?? many thanks Share this post Link to post Share on other sites
Thyncho88 54 Report post Posted May 7, 2012 ahhahaha! Thanks for the credits!!!! This fonts I made them a long time ago. This ones are better : HERE Good addon! Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted May 7, 2012 (edited) Firstly congrats on your work thus far! i like the light casings, the shiny number plate, the skins, the fact the delorean goes over 100mph! Secondly may i suggest opening Sanny and removing the wanted level? then using txd editior to edit the font (hud) the remove wanted stars! Also making the speedo smaller i have done the above and it works better! In addition to this i have a mission (WIP) where you deliver flyers for saving the clocktower with a flying delorean! Thirdly may i suggest a partnership in exchanging material or may i request using some of your add-ons or could you possibly give me some pointers?? many thanks Thank you for your interest in my addons. Unfortunately, everytime I try to edit the main.scm with Sanny Builder, it tells me there is some unknown variable in the main that won't allow it to be editable by the user. So as an alternative, everytime I get a wanted level, I just type in the cheat: leavemealone In addition to this, I'm not sure how to edit the speedo from the main.scm, but I have edited speedos for SA such that you no longer require fuel! Lastly, it is unfortunate, but I do not have any sort of file sharing account. If I did, I would have to ask for proper permissions from Carlos85G (for the DeLorean models) and such before releasing my textures, retextures, and addons. ------------ For pointers, all I can say is that you should take out an hour or two once a week to work on these mods. - Within this hour, use tools such as the IMG tool to extract skins such as the "Casual" T-shirt Marty Mcfly skin. - Then, use a TXD editor to export the texture as a .bmp image and edit it using a program such as Photoshop, GIMP, Paint.NET, or something along those lines. - Make sure you have HD photos available from the movie, or photos of accessories such as Marty's Casio watch or of the DeLorean's rear lamps. - Some textures (such as the DeLorean license plates, rear lamps, etc) you will have to make on your own by looking at other photos. This is where you will have to have a lot of patience because mistakes will be made. - Once you do that, get familiar with the GTA Mod Installer. Look at a few installscript_gtavc.txt files to learn how they work. Then, try making a test of your own. - Once you have mastered making Mod Installer scripts, you will be abble to add your files to the game with the click of a button! ------------ I believe that's all I can really say regarding that. I'll edit this post if I think of anything else. Good luck, - RobertBlox Edited May 7, 2012 by RobertBlox Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted May 8, 2012 Marty Mcfly (1985 with vest) skin redone! You can watch the video below or look at the first post from this thread. Share this post Link to post Share on other sites
gtavicecity 6 Report post Posted May 8, 2012 I like Skin But you made any changes in the model? I think it looks something different. Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted May 8, 2012 I like Skin But you made any changes in the model? I think it looks something different. Nope, no model changes. The only changes I made were the vest and minor changes to the jean jacket. All I did was use the Tommy Vercetti Country Club Outfit because it flips the torso texture. Share this post Link to post Share on other sites
Goingnowherefast 1 Report post Posted May 9, 2012 - Then, use a TXD editor to export the texture as a .bmp image and edit it using a program such as Photoshop, GIMP, Paint.NET, or something along those lines. - Make sure you have HD photos available from the movie, or photos of accessories such as Marty's Casio watch or of the DeLorean's rear lamps. - Some textures (such as the DeLorean license plates, rear lamps, etc) you will have to make on your own by looking at other photos. This is where you will have to have a lot of patience because mistakes will be made. - Once you do that, get familiar with the GTA Mod Installer. Look at a few installscript_gtavc.txt files to learn how they work. Then, try making a test of your own. - Once you have mastered making Mod Installer scripts, you will be abble to add your files to the game with the click of a button! Well ta. First i already do all of the above minus the Installer script i tried once to no pervail. Secondly make sure the Sanny is located to the right installation (if you have more than one!) also make sure its main not main 1, 2 etc press f6 before you start to make sure it runs ok. what i did: searched "wanted" higglighted and deleted the main script changed another others to > 1 removed it from the list of create threads next with the speedo i looked under this line... "033F: set_text_draw_letter_width_height" press f3 to scroll down until :SPDMTR_141 comes up changed the numbers from 033F: set_text_draw_letter_width_height 2.0 8.0 to 033F: set_text_draw_letter_width_height 1.0 5.0 then press f6 should sort it out!! Share this post Link to post Share on other sites
RobertBlox 112 Report post Posted May 9, 2012 Well ta. First i already do all of the above minus the Installer script i tried once to no pervail. Secondly make sure the Sanny is located to the right installation (if you have more than one!) also make sure its main not main 1, 2 etc press f6 before you start to make sure it runs ok. what i did: searched "wanted" higglighted and deleted the main script changed another others to > 1 removed it from the list of create threads next with the speedo i looked under this line... "033F: set_text_draw_letter_width_height" press f3 to scroll down until :SPDMTR_141 comes up changed the numbers from 033F: set_text_draw_letter_width_height 2.0 8.0 to 033F: set_text_draw_letter_width_height 1.0 5.0 then press f6 should sort it out!! Great, I just wanted to make sure you knew just in case. Also, I did set the installation properly to my GTA VC under the C Drive. The thing is that the main.scm does open in Sanny Builder, but upon compiling the file I end up getting errors in multiple locations where it says "Expected 2 parameters" The odd thing is that I also did not edit those areas either. To make sure I didn't do something wrong, I opened the main again and pressed compile without changing any of the lines.... Still, no luck! I guess it's another problem with Win-64 bit computers... Share this post Link to post Share on other sites